SEARCH PRODUCT

HYPERDESMO®-PB-2K

HYPERDESMO®-PB-2K

HYPERDESMO®-PB-2K is a fast-curing, two-component, bitumen-extended polyurethane fluid for waterproofing and protection. It produces a highly elastic membrane with strong adhesion to many types of surfaces and excellent mechanical and chemical resistance properties.It is based on a pure elastomeric hydrophobic polyurethane resin extended with chemically polymerised virgin bitumen.

TDS HYPERDESMO®- PB-2K, PDF, 84.47kBDOWNLOAD NOW

Product Details

  • RECOMMENDED FOR
  • FEATURES & BENEFITS
  • Waterproofing of gypsum and cement boards
  • Protection of polyurethane insulation foams
  • Protection of bitumen membranes and EPDM membranes
  • Waterproofing of bathrooms (under tiles)
  • Insulation of verandas and balconies (under tiles)
  • Protection of flower pots and roof-top gardens
  • Waterproofing of light roofing made of metal or fibrous cement
  • Protection of non-potable water tanks
  • Basement insulation
  • Protection of foundations
  • Waterproofing of bridge platforms
  • Protection of “cut-and-cover” tunnels
  • Waterproofing of irrigation channels
  • Components easily mixed, 1:1 by volume
  • Fast curing
  • Thick, bubble-free, membrane possible
  • Being a two-component product means that the quantities not mixed can be stored for later use
  • Its low modulus gives it excellent substrate crack-bridging properties
  • Excellent adhesion on almost any surface, with or without the use of special primers
  • No thinning is required but SOLVENT-01 may be used
  • Excellent thermal resistance, the product never turns soft.  Max service temperature 80 oC, max shock temperature 200 oC
  • Resistance in the cold:  The film remains elastic even down to -40 oC
  • Excellent mechanical properties, high elongation, tensile and tear strength, high abrasion resistance
  • Good chemical resistance
  • Good water vapor barrier properties
  • Can be also used as a joint sealant
    • Waterproofing of gypsum and cement boards
    • Protection of polyurethane insulation foams
    • Protection of bitumen membranes and EPDM membranes
    • Waterproofing of bathrooms (under tiles)
    • Insulation of verandas and balconies (under tiles)
    • Protection of flower pots and roof-top gardens
    • Waterproofing of light roofing made of metal or fibrous cement
    • Protection of non-potable water tanks
    • Basement insulation
    • Protection of foundations
    • Waterproofing of bridge platforms
    • Protection of “cut-and-cover” tunnels
    • Waterproofing of irrigation channels
    • Components easily mixed, 1:1 by volume
    • Fast curing
    • Thick, bubble-free, membrane possible
    • Being a two-component product means that the quantities not mixed can be stored for later use
    • Its low modulus gives it excellent substrate crack-bridging properties
    • Excellent adhesion on almost any surface, with or without the use of special primers
    • No thinning is required but SOLVENT-01 may be used
    • Excellent thermal resistance, the product never turns soft.  Max service temperature 80 oC, max shock temperature 200 oC
    • Resistance in the cold:  The film remains elastic even down to -40 oC
    • Excellent mechanical properties, high elongation, tensile and tear strength, high abrasion resistance
    • Good chemical resistance
    • Good water vapor barrier properties
    • Can be also used as a joint sealant